810kW AMICO Natural Gas Genset

Our industrial and commercial gas generator sets are proven for reliable operation with a wide range of gaseous fuels including natural gas, biogas from landfills and digesters, coal gas, propane and alternative fuels. We build durable, low life-cycle cost power systems that we integrate with controls, exhaust systems, fuel train, combined cooling heat & power skids and switchgear.

Contact information

E-mail

E-mail: globalsales2013@gmail.com

We will reply to you within 24 hours.

Recommended Operation Conditions
1. CH4 Content of Gas ≥ 76%
2. Gas Pressure ≥ 3 kPa
3. Calorific Value ≥ 32 MJ/m³
4. H2S Content of Gas ≤ 20 mg/m³
5. Total Sulphur Content of Gas ≤ 460 mg/m³
6. Altitude ≤ 4,000 m
7. -25℃ ≤ Ambient Temperature ≤ +50℃
Advantages & Features
1. Our 810kW natural gas power unit is equipped with reliable Steyr & AVL Tech. engine
2. This industrial gas power unit enjoys advanced lean-burn technology
3. This 810kW natural gas power unit is adaptable for a wide range of gas pressure
4. Ideal power for pumps, gas compressor and oil pump
Specification & Configuration

810kW Natural Gas Power Unit

Model AMCD810F-3PN
Output Power 810 kW/1,300 rpm
Output Torque 7,000 Nm/900 to 1,100 rpm
Output Speed 800 to 1,300 rpm
Gas Consumption 0.28 Nm³/kWh
Weight 11,800 kgs
Overall Size (L × W × H) 4,800 × 2,080 × 2,900 mm

Engine

Brand CNHTC (Steyr & AVL Tech.)
Model T12 × 3
Type 6-cylinder, 4-stroke, turbocharged
Displacement 11.596 L × 3
Compression Ratio 11
Ignition Electric control, independent ignition
Fuel Control Lean-burn, closed-loop control
Speed Control Electric control

Gearbox & Clutch

Gearbox and clutch can be installed according to customer’s requirements.

Others

Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included.
Soundproof equipment, engine oil, coolant and output cable are not included.

All specifications are subject to change without prior notice.


Documents Download
Back     TOP