500kW AMICO Natural Gas Genset
                      
                      Our industrial and commercial gas generator sets are proven for reliable operation with a wide range of gaseous fuels including natural gas, biogas from landfills and digesters, coal gas, propane and alternative fuels. We build durable, low life-cycle cost power systems that we integrate with controls, exhaust systems, fuel train, combined cooling heat & power skids and switchgear.
Contact information
E-mail
                      E-mail: landy.industry20@gmail.com
					  
                      We will reply to you within 24 hours.
                      
                      
                      
                      
                      
     
Recommended Operation Conditions
	
		
			| 
				1. CH4 Content of Gas ≥ 76%
			 | 
		
		
			| 
				2. Gas Pressure ≥ 3 kPa
			 | 
		
		
			| 
				3. Calorific Value  ≥ 32 MJ/m³
			 | 
		
		
			| 
				4. H2S Content of Gas ≤ 20 mg/m³
			 | 
		
		
			| 
				5. Total Sulphur Content of Gas ≤ 460 mg/m³
			 | 
		
		
			| 
				6. Altitude ≤ 4,000 m
			 | 
		
		
			| 
				7. -25℃ ≤ Ambient Temperature ≤ +50℃
			 | 
		
	
 
Advantages & Features
	
		
			| 
				1. Reliable Steyr & AVL Tech. engine, Mecc Altea alternator and DEIF controller 
			 | 
		
		
			| 
				2. Our 500kW gas fueled generator set enjoys advanced lean-burn technology
			 | 
		
		
			| 
				3. Prompt dynamic response similar to diesel genset
			 | 
		
		
			| 
				4. Excellent power generation efficiency of home backup power generator
			 | 
		
		
			| 
				5. This standby generator is adaptable for a wide range of gas pressure
			 | 
		
		
			| 
				6. Humanized manual, semi-auto and full-auto operation modes
			 | 
		
	
 
Specification & Configuration
	
		
			| 
				Model
			 | 
			
				AMC500GFJ4-2PN
			 | 
		
		
			| 
				Prime Power
			 | 
			
				500 kW (625 kVA)
			 | 
		
		
			| 
				Rated Voltage
			 | 
			
				230/400 V
			 | 
		
		
			| 
				Rated Current
			 | 
			
				902.1 A
			 | 
		
		
			| 
				Rated Frequency
			 | 
			
				50 or 60 Hz
			 | 
		
		
			| 
				Power Factor
			 | 
			
				0.8
			 | 
		
		
			| 
				Gas Consumption
			 | 
			
				0.28 Nm³/kWh
			 | 
		
		
			| 
				Weight
			 | 
			
				8,500 kgs
			 | 
		
		
			| 
				Overall Size (L × W × H)
			 | 
			
				6,800 × 3,000 × 2,400 mm
			 | 
		
		
			
				
					Engine
				
			 | 
		
		
			| 
				Brand
			 | 
			
				CNHTC (Steyr & AVL Tech.)
			 | 
		
		
			| 
				Model
			 | 
			
				T12 × 2
			 | 
		
		
			| 
				Type
			 | 
			
				6-cylinder, 4-stroke, turbocharged
			 | 
		
		
			| 
				Displacement
			 | 
			
				11.596L × 2
			 | 
		
		
			| 
				Compression Ratio
			 | 
			
				11
			 | 
		
		
			| 
				Ignition
			 | 
			
				Electric control, independent ignition
			 | 
		
		
			| 
				Fuel Control
			 | 
			
				Lean-burn, closed-loop control
			 | 
		
		
			| 
				Speed Control
			 | 
			
				Electric control
			 | 
		
		
			| 
				Rated Speed
			 | 
			
				1500 rpm
			 | 
		
		
			| 
				Conversion Efficiency
			 | 
			
				40%
			 | 
		
		
			
				
					Alternator
				
			 | 
		
		
			| 
				Brand
			 | 
			
				Mecc Altea
			 | 
		
		
			| 
				Model
			 | 
			
				ECO38-2LN/4
			 | 
		
		
			| 
				Type of Excitation System
			 | 
			
				Brushless with AVR
			 | 
		
		
			| 
				Connection Type
			 | 
			
				3-Phase, 4-Line
			 | 
		
		
			| 
				Conversion Efficiency
			 | 
			
				93.4%
			 | 
		
		
			
				
					Controller
				
			 | 
		
		
			| 
				Brand
			 | 
			
				DEIF
			 | 
		
		
			| 
				Model
			 | 
			
				AGC222
			 | 
		
		
			| 
				Type
			 | 
			
				Manual control, semi-auto control or full-auto control
			 | 
		
		
			
				
					Others
				
			 | 
		
		
			| 
				Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included.
			 | 
		
		
			| 
				Soundproof equipment, engine oil, coolant and output cable are not included.
			 | 
		
		
	
	All specifications are subject to change without prior notice.
 
Documents Download